[SailfishDevel] Problems deploying with SDK 1412

[Tone Kastlunger]

Ok, found the root cause for this.
In my project, I have two sub projects (lets name them a and b)
Sub project a is a tool, and is not used in any rpm,  so it does not have
the .spec file.
Sub project b is my real deal, and has a proper .spec file.

I updated the sdk, opened the project file and switched the runned exe
(from a to b).
For some reason, when switching the configuration of what executable to run
on device (from the main panel)
did not change the setting in the "Run configuration" on the project page
(originally on a). This explains why qmake was looking for the .spec in the
wrong place.


On Thu, Jan 8, 2015 at 11:28 PM, Tone Kastlunger <users.giulietta at gmail.com>
wrote:

> Ok, found the problem.
> the location of the rpm folder containing the .spec file has changed - yet
> again.
> I keep on pushing it from the root directory of the project to my
> subproject root directory every once in a while .
> Can anyone explain why this happens?
>
> On Thu, Jan 8, 2015 at 11:25 PM, Tone Kastlunger <
> users.giulietta at gmail.com> wrote:
>
>> It seems I am facing a similar problem, but on the pc side (win7):
>>
>> Fatal: No spec file found in '/home/mersdk/share//debota/rpm/' and
>> couldn't make one from a yaml #1
>>
>> 23:23:58: The process
>> "C:\sviluppo\sailfish\sdk\settings\SailfishBeta1\mer-sdk-tools\MerSDK\SailfishOS-armv7hl\rpm.cmd"
>> exited with code 1.
>>
>> Error while building/deploying project debota-sailfish (kit:
>> MerSDK-SailfishOS-armv7hl)
>>
>> When executing step 'Rpm'
>>
>> I wonder when this broke? It used to work in the last release.
>>
>> PS : the echo off in the rpm.cmd is really misleading for managing errors
>> like these...
>>
>> On Thu, Jan 8, 2015 at 9:16 PM, Krisztian Olah <fasza2mobile at gmail.com>
>> wrote:
>>
>>> Thanks Michael,
>>> Creating the /opt/sdk/ path seems to have soved the issue, I can't
>>> remember ever having to do this manually. I very recently restored my Jolla
>>> to factory settings so that might have had something to do with it as well.
>>>
>>> Thanks again
>>> Kris
>>>
>>> On 8 January 2015 at 18:35, Michael Neufing <michael at neufing.org> wrote:
>>>
>>>> Hi Kris,
>>>>
>>>> are you using deployment by copying binaries to device?
>>>> If yes, can you check if the folder /opt/sdk exists on your device? If
>>>> not, create it and test again.
>>>> This solved my problems with this deployment mode.
>>>>
>>>> You could also set the deployment mode to RPM.
>>>>
>>>> Michael.
>>>>
>>>>
>>>>
>>>> Zitat von Krisztian Olah <fasza2mobile at gmail.com>:
>>>>
>>>>
>>>>  Hi list,
>>>>> I installed the new SDK yesterday, but since it's installed I cant
>>>>> seem to
>>>>> be able to deploy onto device fails due to an rsync error:
>>>>>
>>>>> rsync: mkdir "/opt/sdk/Trash" failed: No such file or directory (2)
>>>>>
>>>>> rsync error: error in file IO (code 11) at main.c(656) [Receiver=3.1.0]
>>>>>
>>>>> Deploy failed
>>>>>
>>>>> rsync: [sender] write error: Broken pipe (32)
>>>>>
>>>>> 16:50:40: The process
>>>>> "/home/kriszik_arch/.config/SailfishBeta1/mer-sdk-tools/
>>>>> MerSDK/SailfishOS-armv7hl/deploy"
>>>>> exited with code 1.
>>>>>
>>>>> Error while building/deploying project Trash (kit:
>>>>> MerSDK-SailfishOS-armv7hl)
>>>>>
>>>>> When executing step 'Rsync'
>>>>>
>>>>>
>>>>> This is the boilerplate project that is preset by Jolla upon choosing
>>>>> SailfishOS for new project, but same thing happens with my project
>>>>> too. SSH
>>>>> works as it's supposed to, the SDK's connection test reports success,
>>>>> but
>>>>> deploy fails. I didn't try with the emulator, becase I do not wish to
>>>>> work
>>>>> with it even if it worked. I tried to reinstall, checked md5, cleared
>>>>> .config (I am on Arch linux x86_64 KDE), but as of now no luck. Is
>>>>> there
>>>>> anything I might have missed?
>>>>>
>>>>>
>>>>> I would appricate any insight.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Kris
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> SailfishOS.org Devel mailing list
>>>> To unsubscribe, please send a mail to devel-unsubscribe at lists.
>>>> sailfishos.org
>>>>
>>>
>>>
>>> _______________________________________________
>>> SailfishOS.org Devel mailing list
>>> To unsubscribe, please send a mail to
>>> devel-unsubscribe at lists.sailfishos.org
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sailfishos.org/pipermail/devel/attachments/20150108/d45c4674/attachment.html>