[SailfishDevel] How to debug Julla

[Jonni Rainisto]

Few things to check:
- date and clock is current. https connection will fail if clock is even a minute behind real time.
- you haven't touched SSU button in developer mode, if you have then you need to switch your domain back to sales.
If nothing else is helps then setting time and doing factory reset might do the trick as last resort.

re, Jonni
________________________________________
From: devel-bounces at lists.sailfishos.org [devel-bounces at lists.sailfishos.org] on behalf of christopher.lamb at thurweb.ch [christopher.lamb at thurweb.ch]
Sent: Thursday, February 27, 2014 11:48 AM
To: Sailfish OS Developers; Tony
Cc: devel at lists.sailfishos.org
Subject: Re: [SailfishDevel] How to debug Julla

Hi Tony

I initially had great problems upgrading my Jolla, installing stuff
from the store, and even activating developer mode.

After lots of hunting around, experimentation and measuring, I
concluded that the problem was high latency in my home network, and
the Jolla's poor tolerance for this. (Other similar devices could
upgrade no problem). I stripped my home network down to the bare
essentials, the latency issues vanished, and hey presto I could
install developer mode, upgrade my Jolla etc.

Maybe you have a similar issue?

Chris

Zitat von Tony <tony.chendong at gmail.com>:

> Hi,
>
> My Julla ?s system version is 1.0.0.5. I tried to upgrade the system
> , but system mentioned that is the newest version.
> Besides , I also tried to start using development mode. The system
> noticed that development package install failed.
>
> Do you know how to debug it ?
>
> tony.chendong at gmail.com
>
>




_______________________________________________
SailfishOS.org Devel mailing list