[SailfishDevel] QtContacts available

[christopher.lamb at thurweb.ch]

Hi Matthias

As the error says, QtContacts is not installed.

Try this article on tips on how to install to the SDK and Emulator

http://flyingsheeponsailfish.blogspot.ch/2013/11/deploying-additional-packages-to.html

It focuses on Location and Positioning, but is the methods used are  
relevant for QtContacts as well.

The first thing is to establish what is already installed.

For the SDK, the easiest way for a newbie is via the SDK Control  
Center, which is available via the Sailfish icon on the left of the  
QtCreator screen.

On the Emulator, once connected via SSH, you can search for contacts  
modules with

pkcon search name contacts

I have several contacts modules installed on my Emulator, but then I  
have been experimenting with contacts, and will have installed some of  
these myself.

Once you have the correct modules installed to the SDK and Emulator  
(and synced with QtCreator), then you should be able to use QtContacts  
from both C++ and QML.

Ciao

Chris

Zitat von "Matthias Barmeier" <barmeier at barmeier.com>:

> Hi,
>
> the include error is fixed, but now I am back to my old problem:
>
> [W] unknown:33 -  
> file:///usr/share/test/qml/pages/FirstPage.qml:33:1: module  
> "QtContacts" is not installed
>
> import QtContacts 5.0
>
>
> my QML:
>
> import QtQuick 2.0
> import Sailfish.Silica 1.0
> import QtContacts 5.0
>
> Page {
>     id: page
>  ...
>
>
> my test.cpp:
>
> #ifdef QT_QML_DEBUG
> #include <QtQuick>
> #endif
>
> #include <sailfishapp.h>
> #include <QtContacts/QtContacts>
>
> ...
>
> What else must I do ?
>
> Ciao
>     Matze
>
> Am 21.12.2013 14:36, schrieb Andrey Kozhevnikov:
>> add
>> INCLUDEPATH += /usr/include/qt5/QtContacts
>> to pro file
>>
>> On 21.12.2013 18:44, Matthias Barmeier wrote:
>>> Hi,
>>>
>>> I added the CONFIG line to my project file. And added the include  
>>> to my .cpp file, but got this.
>>>
>>> /usr/include/qt5/QtContacts/qcontact.h:53:  
>>> Fehler:qcontactsglobal.h: No such file or directory
>>>
>>> This file is availables under:
>>> /opt/SailfishOS/mersdk/targets/SailfishOS-i486-x86/usr/include/qt5/QtContacts I try to use QtContacts from qml ist this possible  
>>> ?
>>>
>>> Ciao
>>>    Matze
>>>
>>> Am 21.12.2013 13:04, schrieb Andrey Kozhevnikov:
>>>> add it to pro file CONFIG += Qt5Contacts
>>>> and then include in Qt <QtContacs/...>
>>>>
>>>> On 21.12.2013 18:02, Matthias Barmeier wrote:
>>>>> Hi,
>>>>>
>>>>> I am new to SailfishOS coming from Harmattan. How can I add this module ?
>>>>> Is there any Dev Introduction available on how to add modules or  
>>>>> which modules are available ?
>>>>>
>>>>> Thanks.
>>>>>
>>>>> Ciao
>>>>>    Matze
>>>>>
>>>>> Am 21.12.2013 12:59, schrieb Andrey Kozhevnikov:
>>>>>> its Qt5Contacts module
>>>>>>
>>>>>> On 21.12.2013 17:58, Matthias Barmeier wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> is QtContacts available for SDK emulator or Device ? And if it  
>>>>>>> is available where and how can I get it ?
>>>>>>>
>>>>>>> Ciao
>>>>>>>     Matze
>>>>>>> _______________________________________________
>>>>>>> SailfishOS.org Devel mailing list
>>>>>>
>>>>>> _______________________________________________
>>>>>> SailfishOS.org Devel mailing list
>>>>>
>>>>> _______________________________________________
>>>>> SailfishOS.org Devel mailing list
>>>>
>>>> _______________________________________________
>>>> SailfishOS.org Devel mailing list
>>>
>>> _______________________________________________
>>> SailfishOS.org Devel mailing list
>>
>> _______________________________________________
>> SailfishOS.org Devel mailing list
>
>