[SailfishDevel] SyncML profile Nokia Services what is the difference
Tone Kastlunger
users.giulietta at gmail.com
Mon Jul 15 10:07:32 UTC 2019
So even more fun;
updated the sdk to the latest & greates and I cant build :
[mersdk at SailfishSDK build]$ mb2 -t SailfishOS-3.0.3.9-armv7hl -s
../rpm/buteo-syncfw-qt5.spec build
The following 17 NEW packages are going to be installed:
bluez bluez-configs-mer bluez-libs doxygen fdupes glib2-devel hwdata
kf5bluezqt-bluez4 kf5bluezqt-bluez4-devel kmod libiphb-devel
libkeepalive-devel obex-capability obexd pcre-devel
qt5-qtsysteminfo-devel qt5-qttest-devel
17 new packages to install.
Overall download size: 4.2 MiB. Already cached: 0 B. After the operation,
additional 17.5 MiB will be used.
Continue? [y/n/...? shows all options] (y): y
Synchronising target to host
cannot delete non-empty directory: usr/bin
Sync completed
qemu: Unsupported syscall: 384
qemu: Unsupported syscall: 384
qemu: Unsupported syscall: 384
qemu: Unsupported syscall: 384
Building target platforms: armv7hl-meego-linux
Building for target armv7hl-meego-linux
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.l1AJwn
+ umask 022
+ cd /home/mersdk/share/checkouts/git/buteo-syncfw/build
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
-fmessage-length=0 -march=armv7-a -mfloat-abi=hard -mfpu=neon -mthumb
-Wno-psabi'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
-fmessage-length=0 -march=armv7-a -mfloat-abi=hard -mfpu=neon -mthumb
-Wno-psabi'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
-fmessage-length=0 -march=armv7-a -mfloat-abi=hard -mfpu=neon -mthumb
-Wno-psabi -I/usr/lib/gfortran/modules'
+ export FFLAGS
+ LD_AS_NEEDED=1
+ export LD_AS_NEEDED
+ export QT_SELECT=5
+ QT_SELECT=5
+ qmake -qt=5 -makefile 'QMAKE_CFLAGS_RELEASE=-O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0
-march=armv7-a -mfloat-abi=hard -mfpu=neon -mthumb -Wno-psabi'
'QMAKE_CFLAGS_DEBUG=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
-fmessage-length=0 -march=armv7-a -mfloat-abi=hard -mfpu=neon -mthumb
-Wno-psabi' 'QMAKE_CXXFLAGS_RELEASE=-O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0
-march=armv7-a -mfloat-abi=hard -mfpu=neon -mthumb -Wno-psabi'
'QMAKE_CXXFLAGS_DEBUG=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
-fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat
-Wformat-security -fmessage-length=0 -march=armv7-a -mfloat-abi=hard
-mfpu=neon -mthumb -Wno-psabi' QMAKE_STRIP=: PREFIX=/usr -recursive
VERSION=0.8.16 CONFIG+=usb-moded DEFINES+=USE_KEEPALIVE
Usage: /usr/lib/qt5/bin/qmake [mode] [options] [files]
QMake has two modes, one mode for generating project files based on
some heuristics, and the other for generating makefiles. Normally you
shouldn't need to specify a mode, as makefile generation is the default
mode for qmake, but you may use this to test qmake on an existing project
Mode:
-project Put qmake into project file generation mode
In this mode qmake interprets files as files to
be built,
defaults to *; *; *; *.ts; *.xlf; *.qrc
Note: The created .pro file probably will
need to be edited. For example add the QT variable to
specify what modules are required.
-makefile Put qmake into makefile generation mode (default)
In this mode qmake interprets files as project files to
be processed, if skipped qmake will try to find a project
file in your current working directory
Warnings Options:
-Wnone Turn off all warnings; specific ones may be re-enabled by
later -W options
-Wall Turn on all warnings
-Wparser Turn on parser warnings
-Wlogic Turn on logic warnings (on by default)
-Wdeprecated Turn on deprecation warnings (on by default)
Options:
* You can place any variable assignment in options and it will be *
* processed as if it was in [files]. These assignments will be parsed *
* before [files]. *
-o file Write output to file
-d Increase debug level
-t templ Overrides TEMPLATE as templ
-tp prefix Overrides TEMPLATE so that prefix is prefixed into the
value
-help This help
-v Version information
-after All variable assignments after this will be
parsed after [files]
-norecursive Don't do a recursive search
-recursive Do a recursive search
-set <prop> <value> Set persistent property
-unset <prop> Unset persistent property
-query <prop> Query persistent property. Show all if <prop> is empty.
-cache file Use file as cache [makefile mode only]
-spec spec Use spec as QMAKESPEC [makefile mode only]
-nocache Don't use a cache file [makefile mode only]
-nodepend Don't generate dependencies [makefile mode only]
-nomoc Don't generate moc targets [makefile mode only]
-nopwd Don't look for files in pwd [project mode only]
error: Bad exit status from /var/tmp/rpm-tmp.l1AJwn (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.l1AJwn (%build)
On Sat, Jul 13, 2019 at 1:11 AM deloptes <deloptes at gmail.com> wrote:
> Tone Kastlunger wrote:
>
> > qmcebatterystatus.h
>
>
> /srv/mer/targets/SailfishOS-3.0.2.8-armv7hl/usr/include/mce-qt5/qmcebatterystatus.h
>
> is in libmce-qt5-devel
>
> Strange because I did not install it manually
>
> regards
>
>
>
> _______________________________________________
> SailfishOS.org Devel mailing list
> To unsubscribe, please send a mail to
> devel-unsubscribe at lists.sailfishos.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sailfishos.org/pipermail/devel/attachments/20190715/62a3933d/attachment-0001.html>
More information about the Devel
mailing list