[SailfishDevel] How to monitor inputs from a earphone remote control

[Jonni Rainisto]

Hi,

Afaik there is no low level support (correct me if I'm wrong). Someone would need to implement a kernel module, that exposes /dev/input/event[x] for those buttons. But last time when I checked there was no such module in firmware. But kernel is of course open source, so nobody is stopping you or the community to do it. Or make a feature request in together.jolla.com and hope that it will be picked up in some future sw update.


________________________________________
From: devel-bounces at lists.sailfishos.org [devel-bounces at lists.sailfishos.org] on behalf of Franck Routier (perso) [alci at mecadu.org]
Sent: Friday, February 28, 2014 10:15 AM
To: devel at lists.sailfishos.org
Subject: Re: [SailfishDevel] How to monitor inputs from a earphone remote control

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Le 27/02/2014 17:39, Jonni Rainisto a écrit :
> Currently you cannot as there is no support for earphone buttons
> done yet.

Thanks for your quick answer. So I understand there is no support in
the sdk. But is there also no low level support ? With X, I would use
xev to monitor events. Is there a similar tool for Wayland ?

Franck
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQEcBAEBAgAGBQJTEEWMAAoJEGEvoAir78RorV4H/j2X1BDOsOvtP1t6rxjtu7kE
arl170Lj4iDaAhnq3T0ZzIj1UUfD5hwh5iJVR/qivY2Qx9WzqR/1a63TcKNrtR9W
elASs5chm/X+Y8A7WsRDeXa9YtUpLn5BoiIXGPzCZCC60bg7PeEpEqOv5qQvDxd3
2dr6RtwYX8hWOL3qLZlXjSCoLD9Si5++NAsYxLeI/t7rolW1gAGfGhWd0znewSNb
yysmEbSkqP7veSQhQwsCTN4mFjBLQrk1dTb/4GEGNTiWw0x1lkx7/pYgys9bRxe8
Z0iG8GVw7ZKVcxXiuKKkpzodeI9OQRH/Z6FoiQR95+oH3khqkIbaDAlHuSAeimc=
=Hqt6
-----END PGP SIGNATURE-----
_______________________________________________
SailfishOS.org Devel mailing list