[SailfishDevel] sporadic bouts of "Could not connect to MerSDK Virtual Machine. Timeout waiting for reply from server."

fasza2mobile at gmail.com fasza2mobile at gmail.com
Sat Apr 26 13:47:26 UTC 2014


I believe the  timeout setting can be adjusted in QtCreator where you set up your mer device(ssh password, etc). By increasing this value you can probably prevent the timeout issue altogether. I don't have the SDK in front of me to give you the exact menu you need to open, but it isn't too hard to find once you know what you're looking for. 

On Sat Apr 26 2014 13:41:20 GMT+0100 (BST), christopher.lamb at thurweb.ch wrote:
> Hi All
> 
> I am suffering from sporadic bouts of the error: "Could not connect to  
> MerSDK Virtual Machine. Timeout waiting for reply from server"
> 
> One moment I can be happily hacking and deploying code to my Jolla  
> without error. Then I make a small change to the code, try to deploy,  
> and bing! the error rears its ugly head once again like a scandinavian  
> troll from under a bridge.
> 
> 
> Project ERROR: Could not connect to MerSDK Virtual Machine. Timeout  
> waiting for reply from server.
> 14:02:28: The process  
> "/Users/christopherlamb/.config/SailfishAlpha4/mer-sdk-tools/MerSDK/SailfishOS-armv7hl/deploy" exited with code  
> 1.
> Error while building/deploying project landed26_QT5 (kit:  
> MerSDK-SailfishOS-armv7hl)
> When executing step 'Rpm'
> 14:02:28: Elapsed time: 00:27.
> 
> 
> When the error occurs, there seem to be at least 2 variants:
> 
> 1) It will successfully deploy "As binaries" without error, but will  
> give the error on "deploy as RPM".
> 
> 2) Any kind of deploy gives the error.
> 
> 
> The strange thing is, that despite the error, it does seem to  
> (sometimes) deploy (or possibly partially deploy) code.
> 
> Right now I am getting the error in constellation 1), so according to  
> the error a "deploy as RPM" should fail. Yet the test below indicates  
> that it is at least partially deploying code.
> 
> 
> [root at Jolla javascript]# pwd
> /usr/share/landed26_QT5/qml/javascript
> [root at Jolla javascript]#
> [root at Jolla javascript]# ls -ahl
> total 52K
> drwxr-xr-x 1 root root  180 2014-04-26 13:56 .
> drwxr-xr-x 1 root root  110 2014-04-26 13:56 ..
> -rw-r--r-- 1 root root 4.2K 2014-04-26 13:55 jsonpath.js
> -rw-r--r-- 1 root root 1.3K 2014-04-26 13:55 jsonSupport.js
> -rw-r--r-- 1 root root  349 2014-04-26 13:55 landed.js
> -rw-r--r-- 1 root root 1.2K 2014-04-26 13:55 message.js
> -rw-r--r-- 1 root root 8.4K 2014-04-26 13:55 readDataModel.js
> -rwxr-xr-x 1 root root 8.8K 2014-02-03 08:32 settingsDB.js
> -rw-r--r-- 1 root root 5.2K 2014-04-26 13:55 writeDataModel.js
> 
> //create new file testDeploy.js in QtCreator, then attempt deploy as  
> RPM. Error is generated. Repeat attempt to deploy as RPM. Error is  
> generated again.
> //but testDeploy.js is now on the Jolla!
> 
> [root at Jolla javascript]# ls -ahl
> total 56K
> drwxr-xr-x 1 root root  206 2014-04-26 14:01 .
> drwxr-xr-x 1 root root  110 2014-04-26 14:01 ..
> -rw-r--r-- 1 root root 4.2K 2014-04-26 14:00 jsonpath.js
> -rw-r--r-- 1 root root 1.3K 2014-04-26 14:00 jsonSupport.js
> -rw-r--r-- 1 root root  349 2014-04-26 14:00 landed.js
> -rw-r--r-- 1 root root 1.2K 2014-04-26 14:00 message.js
> -rw-r--r-- 1 root root 8.4K 2014-04-26 14:00 readDataModel.js
> -rwxr-xr-x 1 root root 8.8K 2014-02-03 08:32 settingsDB.js
> -rw-r--r-- 1 root root   38 2014-04-26 14:00 testDeploy.js
> -rw-r--r-- 1 root root 5.2K 2014-04-26 14:00 writeDataModel.js
> 
> So it looks like that after a second failed deploy, the file is  
> actually deployed!
> 
> 
> During bouts of the error, QtCreator seems to get out of sync the true  
> status of the SDK VM (indicated by the VirtualBox GUI). So QtCreator  
> may show the green "Start SDK" status, even though the SDK is already  
> running. Or QtCreator shows the same button grey.
> 
> So far I have not found any lasting solution to prevent the error in  
> the first place. Sometimes it goes away on its own accord, and  
> sometimes various combinations of restarting VirtualBox, the VM,  
> QtCreator or my development host help for a while (but rarely for long).
> 
> What exactly is the timeout? Is this a property that I can increase?
> 
> The "known issues" page of the Alpha (Qt4.8) SDK suggests:
> 
> https://sailfishos.org/wiki/SDK_Alpha_Known_Issues
> 
> VBoxManage modifyvm MerSDK --natdnshostresolver1 on
> 
> But that has not helped.
> 
> I am running the very latest version of the SailfishOS SDK, but had  
> the same error with previous versions.
> 
> Any ideas?
> 
> Chris
> 
> 
> 
> _______________________________________________
> SailfishOS.org Devel mailing list
>


More information about the Devel mailing list