[SailfishDevel] The Other Half I2C

[David Greaves]

>From some (soon-to-be-released) docs by Kalle Jokiniemi

# Enable VDD
echo 1 > /sys/devices/platform/reg-userspace-consumer.0/state
# Disable VDD
echo 0 > /sys/devices/platform/reg-userspace-consumer.0/state

David

On 23/12/13 14:49, Kimmo Lindholm wrote:
> Anchors aweigh!
>  
> Just hooked up scope to I2C bus on pogo pins, and there is life!
>  
> Can someone point me in correct direction to enable 3.3V pin?
>  
> 3.3V seems to be active just for a while when I press the cover detector switch
> and after eeprom in address 0x50 is tested 3.3V is gone.
>  
>  
>  
> Best Regards,
> -----------------  --... ...--  -.. .  --- .... ..--- .... --.- .--. 
> ----------------
>  
> *Kimmo Lindholm *
> *Hardware and Platform Development Manager*
>  
> EKE-Electronics Ltd.
> Piispanportti7, FI-02240 Espoo, Finland
> Tel. +358 9 6130 3305, fax +358 96130 3300, mobile +358 40 500 0081
> kimmo.lindholm at eke.fi www.eke.com <http://www.eke.com>
>  
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
>  
>  
>  
>  
> 
> 
> _______________________________________________
> SailfishOS.org Devel mailing list
>